Three-level protection for 10 signal wires

The ADL-ÜSS protects its sensitive measuring technology from damage.
It has no influence on the measuring signal.
It can protect up to 10 signal wires.
Since there are no series resistors are suitable
it is for all analog signals.
Also for the resistance measurement as with
PT100, the module is ideally suited.

Advantages and functions

With common reference potential and separate GND / PE connection.

Technical specifications

Shop-Link: ADL-ÜSS

Temperature string

The ADL-TMK ® temperature string is used to measure temperature in
multiple depths of soil or water. The temperature string is also
used in thermal systems as well as in the monitoring of mining and buildings.
The string can be manufactured very flexible in length from a few meters up to
several hundred meters. The segmentation of the sensor modules can be done on
customer request.Up to 1000 meters long. The string can remain permanently
in the environment to be measured. Connection via 2-wire RS485 bus with
open vendor-independent Modbus-RTU protocol.
Up to 253 ADL-TMK® modules on one bus.

Advantages and functions

• Flexible string up to 1000 meters in length (other lengths on demand)
• Segmentation of the sensor modules can be done on customer request
• More cost-effective than fiber optic temperature measurement, because the string can remain permanently in the environment to be measured
• Long cable lengths possible via 2-wire RS485 bus
• open vendor-independent Modbus-RTU protocol
• Up to 253 ADL-TMK® modules can be connected to each bus or string

Wiring

• Highly flexible, durable and waterproof cable
• 4x 0.5 - 4 x 1.5 mm2 depending on the application

Communication

• 2-wire RS485 Bus
• Up to 253 modules are addressable on one bus
• Modbus-RTU protocol, 19200 baud, 8n1, addresses 1-253
• Cable lengths up to 1000 meters possible

Technical data temperature sensor

Shop-Link: ADL-TMK

Soil temperature profile

Over the 6 measuring stages the soil temperature as well as the
Air temperature measured. The floor temperature profile sets the
Measured values directly into a digital RS485 bus signal.
Easy insertion of the ADL-BTP into the soil with minimal
Soil disturbance.

The ADL-BTP is a transmitter for determining the
Soil temperature in different depths.

The floor temperature profile is characterized by its simple
Handling and minimal ground failure during installation.

The measured values of the individual depth steps are directly in the sensor
detected by a temperature sensor embedded in the stainless steel ring,
converted to the Modbus RTU format and via the RS485 bus
provided.

Due to the white plastic, the sensor has a low
Self-heating on the surface and can therefore also the
Record air temperature near ground.

The floor temperature profile has a modular structure, thus
Individual lengths and measuring depths can be realized.

The sensor is suitable for the construction of RS485 bus systems
with different sensors up to a length of 1200m.

Technical specifications

Shop-Link: ADL-BTP